software errors or installation issues in canon pixma mx7600 printer

Rebooting the computer is a good initial step to begin resolving software or installation issues. Instructions to restart the computer for Windows and Macintosh operating systems.

Windows 7

1. Click the Start button.
2. Click the arrow to the right of the Shutdown button .
3. Click 'Restart' from the menu that appears.

Windows Vista

1. Click the Start button.
2. Click the arrow to the right of the Lock button.
3. Click 'Restart' from the menu that appears.

Windows XP

1. Click Start
2. Select 'Turn Off Computer'
3. Click 'Restart'

Read More...

Canon Pixma MP800: Troubleshooting Guide

Canon designed the PIXMA MP800 as an all-in-one printer, copier and scanner. It appeals to the home user who needs these office services but is limited for desk space. Even the best Canon printer can stop working. Troubleshoot your PIXMA MP800 to help find and fix common underlying problems that may affect the printer's performance.

Make sure the MP800 is plugged into a reliable power source--for the best results, plug it directly into an outlet instead of using an extension cable--and powered on if its front display panel is dark.

Check the front and back paper feeder slots if the MP800 makes strange noises or stops printing halfway through a printing job. The device may be clogged. Remove any pieces of paper that may be stuck.

Review the front LCD display screen for an error. The error message typically describes what's wrong and how to fix it.

Adjust the MP800's print head if your printer results look crooked or off-balance. Press the "On/Off" button to turn off the device, then turn it back on. Insert two A4-sized (letter size) sheets of plain paper into the MP800's top feeder slot. Press "Maintenance" on the MP800's display screen and use the arrow keys to scroll down to "Manual Head Align." Push "OK" and follow the on-screen prompts to complete the alignment process.

Clean the MP800's scanner bed if the LCD screen displays an error saying, "Cannot Obtain Clean Scan" or if your scanning results look streaked, splotched or obscured by debris. Canon recommends wiping the glass with a clean, lint-free cloth. Solid debris deposits can be removed with water. Don't use glass cleaners, as this may damage the MP800.

Dial the Canon printer support line at 8555172433 if you still can't get your PIXMA MP800 printer to work correctly.
Read More...

How to Troubleshoot Canon Printer Problems

Canon is a brand of computer printers that makes commercial products that are available around the world. If you enjoy one of their printers at your home or office you may at some time experience some slight performance errors. These problems are usually easily fixed by following a simple troubleshooting process, which will take you just a few minutes. If you continue to experience printer failure or the problems become more severe, contact your Canon supplier for technical support.

1.     Connectivity Problems

Make sure that the printer is connected to a power outlet. The power cable should be connected in the back of the printer and to a working electrical socket.

Check that the wire from the printer is running to the correct port on the computer tower. The wire runs from the small, square port on the printer to one of the USB ports on your tower or laptop computer.

Turn the printer on. Much of your printing failures can be avoided by making sure that the power is turned on before selecting the print command.

Install any updates or replacement software needed to run your printer on your computer. You can get this software from the manufacturer's website and will be notified through your printer drive if there is something new to download.

2.     Feeder Problems

Pull out all of the paper supply in the printer and make sure that all pieces of paper are flat and whole. Any folded corners, crumpled sheets or torn pieces should be thrown away.

Check the size of the paper you are using and check the paper guide on the supply to make sure the paper is the correct size. The paper guide is the small plastic clip that holds the paper steady in the feeder.

Open the cover of the printer and make sure there is no paper stuck within the feed rollers. You should pull out the jammed paper if there is any, including any little torn pieces that may be stuck inside.

Clean out the feed rollers with compressed air to remove any dirt inside the printer and refill the paper supply.

3.     Ink Problems

Check the ink levels in your cartridges to see if you have to replace the ink. You can do this through the control panel of your printer software. If you don't know where to find these controls, just search your computer for 'printer drive'.

Open the cover of the printer and wait for the ink cartridges to stop in front of you within the printer. This will allow you to take them out and replace them with full ones.

Pull the cartridges out of the printer. The number of cartridges and how to remove them will vary with your model of printer, but usually there is a small clip holding the top edge of the cartridge in place. Just push this clip back and pull the ink out.

Read More...

How To Service My Printer - Maxprint Printer Guide for Multifunction Printers

How To Service My Printer - Maxprint Printer Guide for Multifunction Printers

MISS Guides

• Place the printer appropiate place
• open the ink cover and close it back please refer picture above
• dont raise up the ink system
• always turn on your printer 
• please see picture above for error code display at your printer
• tqvm

·         Read More..

Replace ink tank(s) MG5120 in Canon Printer

When you need to replace ink tanks, follow the procedure below.

important:

If you remove an ink tank, replace it immediately. Do not leave the machine with ink tanks removed.

Use new ink tanks for replacement. Installing used ink tanks may cause the nozzles to clog. Furthermore, with such ink tanks, the machine will not be able to inform you when to replace the ink tanks properly.

Once an ink tank has been installed, do not remove it from the machine and leave it out in the open. This will cause the ink tank to dry out, and the machine may not operate properly when it is reinstalled. To maintain optimal printing quality, use an ink tank within six months of first use.

note:

Color ink may be consumed even when printing a black-and-white document or when black-and-white printing is specified.

Every ink is also consumed in the standard cleaning and deep cleaning of the Print Head, which may be necessary to maintain the machine's performance. When an ink tank is out of ink, replace it immediately with a new one.

Make sure that the power is turned on, and open the Paper Output Tray gently.

Lift the Scanning Unit (Cover) until it stops.

The Print Head Holder moves to the replacement position.

attention:

Do not hold the Print Head Holder to stop or move it forcibly. Do not touch the Print Head Holder until it stops completely.

important:

Do not place any object on the Document Cover. It will fall into the Rear Tray when the Document Cover is opened and cause the machine to malfunction.

Be sure to lift the Scanning Unit (Cover) with the Document Cover closed.

Do not touch the metallic parts or other parts inside the machine.

If the Scanning Unit (Cover) is left open for more than 10 minutes, the Print Head Holder moves to the right. In this case, close and reopen the Scanning Unit (Cover).

Remove the ink tank with the lamp flashing fast.

Push the tab (A) and lift the ink tank to remove.

Do not touch thePrint Head Lock Lever (B).

important:

Handle the ink tank carefully to avoid staining of clothing or the surrounding area.

Discard the empty ink tank according to the local laws and regulations regarding disposal of consumables.

note:

Do not remove two or more ink tanks at the same time. Be sure to replace ink tanks one by one when replacing two or more ink tanks.

Prepare the new ink tank.

Read More...

Call Us +1-855-517-2433 (Toll Free)