wireless Network Configuration Page

You can view, confirm and change settings by using your printer's Network configuration page. To access this page, type the printer's IP Address in your browser's (Internet Explorer, Firefox, Safari, etc.)address bar. The Basic Settings Screen opens where Basic network information is displayed.Clicking Advanced will give access to the following:

Top Page

Network Settings

Other Settings

Admin Password

Post a Question....

installation error massage issues in canon printer

Restart The Computer

Rebooting the computer is a good initial step to begin resolving software or installation issues.

Instructions to restart the computer for Windows and Macintosh operating systems.

Click on the appropriate Operating System for instructions to restart the computer: Windows7, WindowsXP,Windows2000/Windows98/WindowsMe, Mac OS9.x, Mac OS X and Windows Vista.
Note: If an OS other than those listed above is being used, follow the appropriate procedure to turn the PC off as provided by the computer's manufacturer or operating system vendor.

Note: If system trouble prevents restarting the PC, use the power switch to turn the PC off, wait a few moments and then use the power switch to turn the PC on again. If system trouble still prevents the restart of the PC, refer to the computer's manufacturer for further assistance. See More ( ) 

Call us +1-855-517-2433 (Toll Free)

Post a Question....

reset canon mg8220 printer

Resetting the Printer

By resetting the printer's power, the print buffer is cleared and certain sensors are reset. If there is invalid data in the buffer, or sensors are stuck in a particular mode; a message may appear.

Follow these steps to reset the printer:

Turn the printer off with the Power button (if available).

Disconnect the data cable from the printer (not applicable to WiFi, Bluetooth or Infrared)

Unplug the printer's power cord for approximately 10 minutes, and then plug it back in. If troubleshooting a communication issue, reconnect the data cable (not applicable to WiFi, Bluetooth or Infrared).

Turn the printer back on.

Note: If resetting the printer does not work, please attempt any other solutions that appeared in your search results. If this is a hardware message on the printer, the printer may need to be repaired. See More ( )

Call us +1-855-517-2433 (Toll Free)

Post a Question....

avoid communication error

                                    Connecting the USB interface cable

                                       Connecting the cable to the printer or peripheral device

                                                Connecting the cable to your computer
 Read More ( )



Post a Question....

Add correct canon mg8220 printer driver in Mac OS X

Note: After confirming that the cable is connected and the printer is powered on, perform the following:
Users with Mac OS versions older than Leopard (OS X 10.5.x )
In the Apple menu, open System Preferences.

Open Print and Fax.

Be sure that the printer to be deleted is highlighted in the Printers section.Click the Minus (-) sign, then click 'OK' on the confirmation message. The printer is deleted. To add the printer, click the Plus (+) sign.

Select the printer to add, then click 'Add'.

For Canon network printers, the printer must be selected from the Canon IJ Network dropdown in the More Printers tab.



The printer is added.

Post a Question.....