Thursday 28 August 2014

How to Fix Error U053 and 1405 in Canon MX Series Printers



1405/ U053 - Orange light blinking 5 times

Description:

Faulty data of the print head.

Resolution:




Fixing the Canon ‘Check ink U051, U052, U053 or U059′ Error Message

Your Canon printer will the ‘Check ink U051, U052, U053 or U059′ code when it is having trouble recognising either one of the ink cartridges installed. The official Canon description for these errors is either “The FINE cartridge is not installed”, ”The FINE cartridge is not installed properly” or  “Appropriate FINE cartridge is not installed”. A FINE cartridge is any modern Canon cartridge produced that has a printhead built into the bottom of the cartridge. Whilst only Canon originals carry the ‘FINE’ branding any functioning compatible, remanufactured or refilled cartridge can be used to resolve these errors.

How do I clear the U051, U052, U053 or U059 error message?

As described above these codes can appear for a couple of reasons. “The FINE cartridge is not installed” indicates that your printer cannot recognise one or more of the installed cartridges at all and “Appropriate FINE cartridge is not installed”, would indicate that an incorrect cartridge is installed. To resolve any of these Canon error messages please follow the steps below until the message disappears:
·        Open up your printer and ensure that both the black and the colour ink cartridge are installed. Your Canon printer needs both of these cartridges installed to print, even if you are only planing on printing in black. For more information on why this is necessary click here.
·        Check to make sure your cartridges carry the correct codes. The label of the cartridge should carry codes matching or at least similar to PG-37, PG-40, PG-50, PG-510, PG-512, PG-540 or PG-540XL for the black and CL-38, CL-41, CL-51, CL-511, CL-513, CL-541 or CL-541XL for the colour. Which of these codes is correct for your printer will depend entirely upon the model of the machine. If there is no indication on the printer as to which cartridges are needed please check your user manual for confirmation.
Check the cartridges contacts are clean and un-obscured. Your Canon printer uses a series of metallic contacts on the front of the cartridge to communicate with it when installed. If these contacts are dirty or covered by protective strips etc. then your printer will not be able to use the cartridge. I recommend removing the cartridge from your printer and wiping down the contacts with a piece of kitchen tissue (or another non-fibrous tissue) to ensure no dirt, ink or natural oils are preventing your printer from reading the cartridge. When finished your cartridges contacts should appear as below.

How to Fix Error 1312 in Canon MX Series Printer


Description

The paper loaded in the cassette (lower) is jammed.

Resolution

Remove the jammed paper following the procedure below -
NOTE - The power cannot be turned off while the machine is sending or receiving a fax, or when the received fax or the unsent faxes are stored in the machine's memory. Make sure the machine completed sending or receiving all faxes before disconnecting the power cord. If you unplug the power cord, all the faxes stored in the machine's memory are deleted.
1.      Press the [Stop] button to cancel any print jobs and turn off the machine.
2.      Detach the rear cover.
3.      Pull out the paper slowly. 
NOTE - Do not touch the inner parts of the machine. If you cannot pull out the paper, open the paper output tray.
4.      Attach the rear cover. 

If you were not able to remove the paper in step 3 continue below:
5.      Detach the lower and upper cassettes.
6.      Pull out the paper slowly.
7.      If the paper is not loaded properly in the cassette, remove the paper, and then reload it after aligning the edges of the sheets. 
NOTE -  When reloading the paper, confirm that you are using the paper suited for printing and are loading it correctly.
8.      Attach the cassettes to the machine, and then press the [OK] button.

How to fix Error 693# in Canon MX Series Printers

Description:

USB sub-system firmware error 

Power off the machine, and power it on again.
If the error still occurs, replace the part listed on the right (under “Parts to be replaced if the listed solutions are not effective”). 




If the above solution has not resolved your error, please contact Canon authorised service facility.

Friday 15 August 2014

How to Fix Error U059 and 1485 in Canon MX Series Printers



Error Code: 1485/ U059


Printing cannot be executed because the ink cartridge installed is not compatible with this machine.


Install an appropriate ink cartridge. Please view the compatible ink cartridges for your machine