Solution 1:
- Switch the printer OFF
- Press buttons 1 + 2 + 3 and 4 (simultaneously using four fingers)
- Keep pressing this four buttons for 10 seconds
- Release the On/Off button (number 4) (Keeping pressing the others)
- After a few seconds (when the printer go ON), release buttons 1, 2, 3
Solution 2 (Thanks to Dick):
- I discovered that the head was blocked from moving all the way to the right by a white nylon lever and discovered that there was a thin, small pad that had come loose and was blocking the mechanism to activate the head motion.
- One pad was about 1/2 inch by 1/2 inch and a second was a narrow 3/32 x 1/2 inch pad both about 1/16 thick.
- I removed these pads and the printer returned to normal
All life demands struggle. Those who have everything given to them become lazy, selfish, and insensitive to the real values of life. The very striving and hard work that we so constantly try to avoid is the major building block in the person we are today. See the link below for more info.
ReplyDelete#selfish
www.inspgift.com
Glad I come across your site. Thanks for sharing concise information. Looking forward for the next;
ReplyDeletewww.n8fan.net